I talked to one of the guys i know from Jacksonville an told me about this one


\





Specifications:
Weight
2.5 kg
Plenum Volume
6.2 liters
Runner Length
17 cm
Fuel Rail Mounting
Stock Location
Fuel Rail Bolt Pattern
Stock
Vacuum Ports
3x1/8" NPT, 2x1/4" NPT
Throttle Body Port Diameter
65mm, Can be custom ported out to 75mm max.
Throttle Body Bolt Pattern
Both stock bolt pattern & 4 on 124mm B.C. (fits most aftermarket 70 and 75mm throttle bodies)
Runner Port Stock port shape, heavy duty aluminum flange can be ported out to match any custom head.

Sensor and Component Compatibility:
Air Intake Temp Sensor
Manifold has mounting provision for stock AIT, relocated from stock location
Air Idle Control Valve
Manifold has port for remote AIC. AIC relocation kit is required to utilize the stock
EGR Valve
Not compatible at this time.
Throttle Cable
Manifold has throttle cable mounting plate with stock bolt pattern. Modification is required to stock bracket.
Throttle Body
Stock and most aftermarket throttle bodies up to 75mm will bolt-up with no modifications