Ya both pinion bearings and both side bearings come in that kit. As well as diff shims, bolts, gasket, pinion shims, and a new crush collar.

Make sure you atleast have a new crush collar for when you do this. The crush collar is a one time use only part. The bearings and shims can be reused (assuming the bearing are not faulty)

Also btw if you thinking about reusing old bearings there are a couple differant specs you use when you set them up with used bearings. PM me if you need those specs.

I can probably have a kit here by Monday evening. Like stated I have plenty of shims you can have. But I know I dont have any new bearings lying around.