OK, Ill start here.

Bdotmil's truck - The notch is the big U(or n) over the axle, with the shocks bolted to it. It allows the axle to not hit the frame. The wheels are 18" titans, with the hub bored to fit a hardbody.

To remove the middle leaf, just remove your leaf springs. Take apart the pack by the clips, and unbolt the center bolt. pull out the middle leaf, replace the bolt and clips.

Running 2 leafs is perfectly safe, I ran my hardbody just like that for quite a while.


That was middle leaf removed, 2" lowering block w/ air in the shocks. And its a 15" rim with 195/60/15.

Any other questions just ask.