Ok guys I have decided to part ways with my setup get out of the game and do something different. I am looking for cash for the parts because I have found something that I would like to buy.

Prices are negotiable to a certain extent. If you have a serious offer feel free shared_pm me, post, or call my cell 407-873-5677 Will.

I may trade for things but it is gonna have to be pretty convincing so as of now i am really aiming for cash. Anyways here we go.



Turbo Kit

Tial 38mm wastegate (polished)
2.25in Intercooler piping with Vibrant coupler and T Bolt clamps
GReddy Type R blow off valve
B series custom top mount manifold t3 t4 flange with external 38mm wastegate flange
BRAND NEW FORGE mbc with 10 ft of vacume line
Autometer Pro-Comp boost gauge
Autometer Pro-Comp oil pressure gauge
AEM AEGO wideband in black
Autometer Ultra-Lite water temperature gauge
Garret GT35R turbo with drain line
3'' downpipe
RC 750 cc injectors or Precision 880 cc injectors with a resistor box
Walbro 255 in tank fuel pump
Aeromotive fuel filter with the metal filter so never needs to be replaced
OBD1 ziff socketed po6 chipped and tuned on base map for 10 lbs this is just to get you started you will need a tune!

Asking $2500



HEAD

Its an LS head full race port and polished. It has a true 5 angle valve job 5 different stones. All bowl work done as well as all spring heights were set.
New valve seals
New guides
Skunk2 springs
Skunk2 retainers
Crower Stage 2 cams (Will make power till 9250rpm)
AEM true time cam gears (silver)
Edelbrock Victor X intake manifold
Edelbrock throttle body spacer
Edelbrock 75mm throttle body
AEM high flow fuel rail with fuel presure gauge
B&M fuel pressure regulator (polished)
RC 750 cc injectors or Precision 880cc injectors
Uncut bronze valve cover
OBD1 LS distributor

The head has maybe 3 hrs worth of run time between idling and test drives and tuning. All head work was done by Steve at Twisters machine shop in Kissimmee.

Asking $1500



BLOCK

B18B1
Golden Eagle sleeves (84.5mm Bore)
Arias pistons 9:2:1
Eagle H beam rods
ARP rod bolts
ACL black coat race bearing
Stock ls crank
Block fitting
Oil feed line
Stock mains,girdle,pickup,
ACT 3 puck clutch and pressure plate
Tapped LS oil pan

Asking $2000



Transmissions

First I have a GSR hydro tranny. Shifts perfect, just rebuilt, no grinds whatsoever. It has 2000 miles on it. You are more than welcome to take it apart and inspect it as long as you can put it back together and I see cash in hand.

Asking $600


I also have an LS cable with a Quaife LSD installed. Reverse is bad, needs collector. Every other gear shifts smooth and fine, no problems. Again feel free to look for yourself as long as you have cash in hand.

Asking $1100



Random Stuff

BRAND NEW Integra Innovate solid alluminum motor mounts $400




PWR intercooler that I made 519 on. Also another intercooler a little bigger than that



I will try to have pictures up in a bit but like i said if you have any questions give me a call 407-873-5677 Will. Most pics are below.