Originally Posted by plazma

Yeah to rivet it you would need a rivet gun. You just make the windsheild as large as the original and drill a pilot hole through the lexan and through the metal lip behind it and put the rivets it. When you snap the trim over it you will never even see the rivets and it will look like a stock windsheild.

If you don't want to use rivets you could do the same thing with screws. Just make sure it will fit below the trim so you don't look all ghetto.

The best stuff to use is the mr-10 but is pricey. It won't scratch very easily so it's a good one to use.