Man I just seem to get all the bad luck... Every bolt I pull off strips on its way back in. I took off my turbo so I could get to the oil dipstick tube, fixed the tube, and while putting the turbo on I stripped the threads on the head for my oil feed line. So I went and got a heilocoil. I installed it, then while tightening the bolt, I stripped the threads on the bolt. UUUGGGHH. So now I have to get a AN fitting and I will just take the helicoil out and tap the hole so I can thread the fitting into the head. And I cant seem to figure out what the tapping/knocking is. It is rediculously loud while driving, but it is only at 1/4 throttle. Any more throttle and it stops. It is really bad, sounds like a friggin rod broke and is rattling around in there. I am gonna pull the oil pan just to play it safe. WOO HOO FOR DSMS......

Also does anyone know the link to instructions on how I can bypass my 02 sensor. My harness is cut, and My car is running rich as shit because of it.