I am selling my AEM Fuel-Ignition Controller computer. This is similar to an Emanage ultimate in function and would require a tuner to properly work it.
This unit is for the most part brand new. I got it from AEM, plugged it in with the harness to see if it worked (it did) then never used it again. I had no real need for it and no way to tune at the time. It does come with its new wire harness but no need with the boomslang one.
I have the software cd somewhere but it is not needed as it is out of date and there is a newer version for free on the AEM forums.
Also the harness has a small adapter kit that goes on the FIC end and when plugged in, it runs just as stock. so if you have the FIC out to work on it you can still drive your car without taking apart the boomslang harness.
The Boomslang harness was made for me directly from boomslang. it is for an 03+ GT-S. I am sure you could use the wires and the FI/C end on another year but the connectors will not connect. All you do is unplug your stock connectors from the ECU, plug in the harness, and plug your stock wires to the other end, no cutting of wires and 100% reversible.
Like the FI/C, the boomslang i put it on the car to see if it worked then took it off. I did cut the wires on the FIC end to make it easier to run through the firewall. They just need to be twisted back together. I can also solder these together for you for a $40 fee as i hate to solder
-AEM FI/C's run new on ebay for 360-400.
-Boomslang 03+ PNP harness runs 300 from boomslang.
----Asking $450 +4.5% paypal Shipped for both the FIC and the boomslang harness.
---I will sell the FIC separate from the boomslang harness if the offer is reasonable.
