No. They are peak and hold, 2-3 ohm impedance injectors.
Ours are saturated, 12-16ohm impedance injectors. They may
work for a little while, but you run the risk of burning up
your injector drivers, which means a dead ECU. -from the 2GNT board
The Accel injectors for a Mustang will fit. Also, 310's are the highest you can go without an SAFC. If you are planning on boosting big, with supporting mods of course, go for the 440's. My friend with the built 420A are running 310's now, and those are limiting him to only about 11-13 lbs. of boost.
__________________
Olympus Evolt E-510, E-520, E-30 x 2
11-22mm f/2.8-3.5 Zuiko Digital
14-54mm f/2.8-3.5 Zuiko Digital
35-100mm f/2 Zuiko Digital
50-200mm f/2.8-3.5 ED SWD Zuiko Digital
Cybersync wireless trigger
FL-36R, FL-50R, Metz-48, and Vivitar 285HV x 3
Last edited by BoostedRS; 07-22-2003 at 03:06 PM.