1997 NT MTX ECU - $100
2g power door panels, Tan/Black - $50
2g Gauge bezel $15
2g (NT) Catback exhaust - $40
2g 3" N1 (Knock-off) exhaust - $120 (Necks down to 2.5 at the cat)
2g Tan cloth front seats - $50 (Drivers side has a cigarette burn in the lower seat)
2g Tan cloth rear seat - (Good condition) - $35
(Full set of seats for $75.
2g (NT MTX) Gauge cluster (80k) $30
2g (NT) Exhaust manifold $10

420a Crank pulley - $15
420a Venom Intake manifold -$300
420a Washer fluid reservoir - $20
420a OEM Coil pack - $20 (2x)
420a OEM Spark plug wires - $15
420a Intake manifold - $30
420a Valve cover - $20 (2x)
420a Fuel rail with injectors - $45
420a Power steering pump - $50
420a Alternator - $30
420a Throttle body - $25
420a Cylinder head with cams and gears (60k miles) $100
420a Shortblock (Will need to be bored and rebuilt, crank is perfect, so are the rods. Previous owner popped the HG and let it sit with coolant in the cylinders. It will need bored/honed and new pistons/rings/bearings) $100

If you need more than one thing, I'll cut you a deal; Just PM me with what you need and we'll talk.


It's a little grimy in the pic, but I've cleaned it up since then.