SPL Traction rods, and KTS Z32 lower brackets are on the way. Next weekend will be a very good weekend.
-SPL traction rods
-KTS Z32 brackets
-Z32 uprights W/ ES poly bushings W/ grease fitting mod and Nismo shock bushings
-F/R lower ball joints
-Reinforced front and rear LCA's
-ES Poly F/R LCA bushings w/ grease fitting mod
-Possibly install the poly sway bar bushings if I can do the grease fitting mod to the brackets.
-Modified front sway bar for increased tension.
-New alightnemt Camber: -2.25* front; -1.75* to -2* rear, and very slight toe in.
__________________
Originally Posted by
Epstein
Either way you're required to do it Tampa style. $1500 kit still gets $4.99 rattle can paint job. Bonus points if you use 2 different colors of gray.