Now in the halogens.. :ignore:

Hood..


Front Fender..


Front Fender..


Door..


Rear Fender..




50/50 with SIP/PFW..not quite enough but almost.


This side with M105/Burgandy Wool. It left its own marring but it removed all defects very weel and in VERY LITTLE time. Was almost effortless!


This side with SIP/PFW. I got a pretty good finish with this combo, however there were still traces of defects throughout the panel and took considerably more time to remove less defects. So I chose to do the car with M105.


SIP LEFT/BEFORE/M105 RIGHT


I did a small section over my M105 panel with 106FF/LC FLAT WHITE and found no holograms just as TSC17 said! Saved me ALOT of time!


Driver/Passenger door after M105/Wool x2




Fender Before:


Fender After M105/Wool x2