View Single Post
Old Oct 2, 2008 | 07:44 PM
  #1 (permalink)  
hondaking625's Avatar
hondaking625
DB1 FTW!!
 
Joined: Jul 2008
Posts: 2,448
Likes: 0
Default ****Forced Induction FAQ*******

Welcome to the Forced Induction FAQ. If you are reading this congratulations you are educating yourself and helping Tampa Racing's tech section to hopefully grow into a vast area of tech info.
  • The purpose of this FAQ is to encourage other members to ask more in depth questions rather the troublesome, vague general ones we have all seen here before.
  • If you are new to the FI(forced induction) world, hopefully this faq will be able to give you a better understanding of the concepts of FI components and how they work. This is going to be a community FAQ. I will start off with a few, and encourage everyone to take a little time and post links to information they feel would be valuable in here.
  • If you are sick of seeing people posting "how much will i make/what times will i run" etc. Find the answer or write something up and PM a link or writeup it to me, or just post it here. I witht he help of the mods will check this post periodically and arrange your posts for quick reference.
  • hopefully we can make this as extensive and organized as the honda-tech FAQ.so start diggin out your saved info and post it up.

__________________________________________________ ________________________


READ BEFORE ASKING QUESTIONS
TURBO TECH 101 BASICS :
TurboByGarrett.com - Turbo Tech101

TURBO TECH 102 ADVANCED :
TurboByGarrett.com - Turbo Tech102

Turbo Tech 103 :
TurboByGarrett.com - Turbo Tech103

One of the best turbo reads :
G2IC Turbo Guide - A Guide to Turbocharging your Honda / Acura Integra

Heres how much boost (PSI) to run |explained :
Turbo D16 • View topic - FAQ: Here's how much boost (psi) to run

Horsepower: Supporting Parts needed to acheive HP goal Reliably| good for use as a guide for B/K motors :horsepower to part charts

Building on a Budget :
what I need to boost my ls? - B20Vtec.Com...... B Series and Beyond

How much can I make on a Stock Motor/How much HP will stock sleeves Hold :
Honda-Tech.com: Forced Induction: H-T's highest HP on a stock block thread....

Ebay turbo/turbo kit information :
Honda-Tech.com: Forced Induction: Noobs and EBAY turbo's, your question's answered.

Turbocharger flow map calculator | Various other Java Calculators FI related :
Ray Hall Turbocharging - Java turbocharger flow map calculator
Ray Hall Turbocharging - Java calculation applets

Turbine housing, Exhaust sizing, and Back Pressure :
Turbine housings, exhaust sizing, and backpressure.

Understanding your Turbo Size, A/R, and trim | Which one is best for you? :
Understanding Your turbo Size, AR and Trim - B20Vtec.Com...... B Series and Beyond

Engine Management Comparisons :
engine management comparison

Boost Controller Comparisons :
boost controller comparison

Air-to-Air Intercooler Information :
How to choose an air/air Intercooler.

How to size fuel Injectors :
How to size fuel injectors.
Fuel Injector information & Specifications specs

How to Clock a Turbo :
How to

When to upgrade fuel lines :
When to upgrade fuel lines.

How to choose a Fuel Pump :
How to choose a fuel pump.

Wastegate sizing :
Wastegate sizing.

Information on Crank Pullies :
Questions for the Experienced......... - B20Vtec.Com...... B Series and Beyond
_more PAGE 2....
pulley kits???????? - Page 2 - B20Vtec.Com...... B Series and Beyond

Differences Between Log, Cast, And tubular Exhaust Manifolds-Explained :
See References on First Page below..

Stock B20+Boost Debate/Information:
Stock B20 + Boost - B20Vtec.Com...... B Series and Beyond

Piston RING gap(install), Oversized valves and boost:
piston ring gap - Team Integra

Piston ring rotation:
Piston Ring Rotation



enjoyy guyssss
__________________

Last edited by hondaking625; Oct 18, 2008 at 07:08 AM.
Reply