Old Aug 27, 2008 | 07:42 PM
  #2 (permalink)  
Presidential_Detail's Avatar
Presidential_Detail
aka The Twanksta!
 
Joined: Oct 2004
Posts: 3,790
Likes: 0
Default

NOW TO THE FUN PART! EXTERIOR! Unfortunately, I took all before pictures of the door jambs and forgot to get after shots, but everything I took a picture of was either removed or cleaned































Washing the wheels and door jambs..










Claying the car..






Test Spot on the hood...


50/50 on hood with Menzerna IP/LC PFW Pad


The wheels get the best treatment possible, I swear that wheel wasnt floating when I took the picture!


Taking the wing off, this enables me to polish the trunk lid the correct way.














Taping off the car...




Did I mention this was a Jap car??


It aint a tight car unless its Type R!




50/50 on Front Fender after IP/PFW




Did I mention this car needed to be polished??


It needed to be washed at this point!


Last shots for day 1...Still need to go over again with 106ff/white and put LSP on.






After the wing bottom was polished, we re-installed to do the top. The tape is so that I dont hit the already polished fenders while polishing the wing...


Final Rinse Down..


FINALLY FINISHED!!! This is when everything pays off!






















The infamous pose! Yes, in YELLOW!!


A Happy Customer!


And off she goes...




As soon as Angelo leaves, this arrives for a full on detail!
__________________

Visit Our Site - Presidential Automotive Detailing
Authorized CQuartz FINEST Installer

Last edited by Presidential_Detail; Aug 27, 2008 at 09:15 PM.
Reply