Ok time for another project.

All parts will be cleaned before sold, and are pretty new. Pics will be up within the next few days also.

1. Gm 3 Bar Map Sensor with pig tail $ 55.00
2. Ls Transmission No grinds what so ever. If you wanna try it before sat, let me know asap. Its all coming out. $300 Pending on Tranny
3.B16 Sleeved Block form JG in Cali. Bored and honed to 84mm I have the reciept from this block and i know im losing out on the money but if yall don't know me by now. LOL!! Really!!
THe block had a small part of the water jacket come lose on the dyno, but i got it repaired which costed me 250 in machine work. THe block will come with main caps and bolts and rear main. No oil or water pump. I have the reciept for the work also. There was no more than 2000 miles if that put on the block.
$650
4.B16 Arp headstuds Only tq down once with only not even 200 miles on them. $80
5.B16 Eagle rods for no more than 2000 or less miles. $200
6.CP 84mm pistons No more than 2000 miles or less $250
7. New in box preceison 650 injectors for obd 1 $200
ANd im thinking thats it for now until i get everything organized. Everything will be out the car this weekend and taken apart and cleaned up. If you have any questions, pm me or call me, everyone pretty much have my number.
8. Full catless 3inch Apexi exhaust. ive only had it on the car for about 2 to 3 months Its a rainbow green color $300 for the whole thing
9. Apexi Twin FMIC with Brackets Huge $400 Look for the retail on that
10. Turbonectics T3/T4 Turbo Polished Housing Very Very little shaft play, ball bearing turbo 50 trim $450
11. Eg intercooler pipes complete with the links and clamps and t-bolts 150, but if you get it with the hks bov $200
12.One Fab Side winder Turbo mani and 3in downpipe $350 Real Deal no knock off
13. Tial 38 mm wastegate with dual springs to support over 20 psi polished $140

And if you have anything for trades, let me know. A running B20 would be great.
And more will be added
Thanks for looking and the pics will be up shortly.