My name is Calvin Baank. As you should know by now I am the owner & creator of eCtune
which is a honda/acura engine computer tuning software. (http://www.ectune.com)

The situation posted by John Vega (mtber) has been going on for a while. I asked John Vega to make a post concerning the issue as I did not have internet access.
I can prove many the accusations with email logs which I am keeping for my lawyer and authorities.

Yes i'm pissed. Yes, I kept out this thread of for a while. For the fact that I travel a lot and didn't have internet. (Only a pda phone).

I gave Alpha the option to work this out. I asked him for a list of call cars he or brotherzracing did on eCtune & a list of the cars/customers which
were falsely tuned on eCtune (tuned on crome but the customer thought they were tuned on eCtune).

Alpha never produced that list within a reasonable amount of time which has lead me to bring the problem into the public eye.
While this whole thing was going and Alpha crying that he didn't do anything wrong to me while he contacted Moates for support and stating that he is using eCtune (recently).
Alpha: So to me you cry and that same day you say that you are using eCtune?

Anyhow, if somebody is tuned by Alpha or Brotherzracing on eCtune. Please contact me per the original instructions in the thread.

I have built detection methods for eCtune customers to know if it's eCtune that is running their ecu.

Instructions:
If you key on and you see 3 short flashes after the normal Key on mil light up, you know u have been tuned with a PRO(single car) version of eCtune.
If anybody has that.. I'll refund that user the eCtune license fee they were charged. I'll get the User ID and show who did that...

If you have been tuned by John aka "Alpha" or Brotherz Racing on eCtune:
Please email Calvin from eCtune at calvin( at )eCtune.com with the following information: (replace at with @)
Full Name:
Phone Number:
Email Address:
Aproximate Date You were tuned:
Amount charged for eCtune license:
Total amount charged for tuning:
Did you check your check engine light to see if you are on a newer build of eCtune?:
How many times did the check engine light flash?:

Thank You,
Calvin Baank - eCtune Creator

-----------------
From: Tuning [mailto:tuning@inductionperformance.com]
Sent: Thursday, May 29, 2008 7:24 PM
To: Moates Support
Subject: Re: Order Update

Hey Craig, I got the hardware. Thanks. Couple issues. My software is detecting the Ostrich but not the Hulog. It's NOT sending the edited code to the ecu through the Ostrich. I get a solid cel, ecu. I tried a friend's Ostrich v2 and Hulog. Works no problem. I'm using eCtune to edit

Thanks Craig

- Induction Performance (AWD Dynojet 424xLC2 Access)
- Tampa, FL 33625
- Tuning: 727.505.1423
--------------------------
So who is really the liar here?

-------------
Calvin,

John Vega contacted me about an inquiry you had into my tuning of Honda ecu's. I rarely tune stock Honda ecu's. About 80% of my tuning consists of AEM EMS. The other consists of Electromotive TeC-3, Honda ECU Editing, Hondata, Crome, AFC, ECU Flash (Mistsu/Subaru), etc. John Vega and Daniel Church have 80% of the stock Honda ecu tuning in this area. Ontop of that I don't write computer code or anything alike. So however someone or yourself came up with me writing my own version is a mistake. I did make one mistake. I stated that I tuned with eCtune to the few stock ecu cars I have tuned in the past. It's because they were all worried about the Crome editor. This is the only reason I used your editor's name. Huge mistake on my part. I should have had more respect for your program, you and myself most importantly. I've heard conflicting stories of Brotherz Racing contacting you to start tuning with eCtune after my leaving their company.
I will include below why I left and why Jamil Janjua would want to throw me under the bus or even if he has a clue what he is talking about. You can contact me at the number below if you would like to talk to me personally or reply to this e-mail

- Induction Performance (AWD Dynojet 424xLC2 Access)
- www.inductionperformance.com
- AEM EMS, Apexi AFC, ECU Flash, Honda ECU Editing, Hondata, Electromotive
TeC-3 and more
- Tampa, FL 33625
- Tuning: 727.505.1423
-------------------------------------------------
-----Original Message-----
From: jamil [mailto:jjanjua@brotherzracing.com]
Sent: Thursday, May 29, 2008 3:27 PM
To: eCtune - Info
Subject: Re: ec tune

I didnt see this email, sorry about that. What can we do to be able to tune with your software? I have a lot of cars that are on ectune and i have no way to tune them . What can we do?
------------------------------------------------

by phone Jamil stated that there was never any car tuned at Brotherzracing with eCtune. Isn't that weird and you tuner(ex-tuner) did tune?
-----------------------------------------
-----Original Message-----
From: Tuning [mailto:tuning@inductionperformance.com]
Sent: Friday, May 30, 2008 2:23 PM
To: Calvin Baank
Subject: Re: Contact #2

I have came up with five cars so far but let me ask before we go further.
Were you not PayPal'd AT ALL from Brotherz Racing, Jamil Janjua or Javed
Janjua? I was simply a "tuner" at the shop. Nothing more. I didn't have
control of credit cards or PayPal accounts. I have spoken to one of my
witnesses that was in the meeting. I told him if he didn't remember it was
fine. He stated he does remember our meeting. He stated he does remember me
giving Jamil Janjua your e-mail address. If you need to speak to him his
name is Roberto. His number is 1.813.748.4311 and his e-mail is
robert.mendoza0001@gmail.com if you have any questions for him

Calvin. There will be no need for further action. I'm working with you and I
will help you get your money for the evaluation tunes if you didn't get it.
I've always thought that it was taken care of by Brotherz Racing/Jamil
Janjua. I wouldnt doubt you didn't get it after everything I went through
working for that shop

I did indeed reply to that. I simply apologized to you and left it at that.
But. If a stock Honda ecu tune does come up soon, like I said dont do many
of those, I will either a) be telling the customer I will be using Crome b)
I will simply request the customer purchases a Hondata S300 c) I will refer
him to John Vega if customer doesnt want to do a or b

- Induction Performance (AWD Dynojet 424xLC2 Access)
- www.inductionperformance.com
- AEM EMS, Apexi AFC, ECU Flash, Honda ECU Editing, Hondata, Electromotive
TeC-3 and more
- Tampa, FL 33625
- Tuning: 727.505.1423