Thread: 3sgte cam specs
View Single Post
Old May 19, 2008 | 09:22 PM
  #3 (permalink)  
SangH's Avatar
SangH
Registered User
 
Joined: Jul 2003
Posts: 124
Likes: 0
Default

Gen2 cams ~235* Duration ~8.5mm max lift on both sides.
Gen3 cams. Intake cam has slightly longer duration, ~4-5*. Has slightly higher lift, ~.5mm. Also ~1.5-2* advanced. Exhaust cam is identical to gen2, except is 4.5* retarded (in relation to gen2 exh. cam position).

I don't know the specs on the gen4, but it doesn't matter since they aren't interchangeable. The caldina uses COP ignition, lacking a distributor (ergo, no notch on the cam) and uses an internal cam sensor.

-Sang
Reply