As I said, this is a 'tweaked' Spearco FMIC. Bar and plate.


Overall length 30", height 8", and core is 3.5" thick. This is good for 600hp. Used on an old turbo 350z project I had, but got wrecked and the IC was "tweaked" in the process.

It has been pressure tested to 32psi no leaks! I set this thing in a garbage can full of water, filled with CFM until the pressure test couplers nearly popped off, no leaks that I could see!

Looking for $150 or trade for some low comp (8.5:1 or 9:1) GSR stock bore pistons, or Skunk2 or Edelbrock GSR intake mani.

Located south of Tampa. Willing to meet part way.

for reference, check with mtber!