i can help ya man...basically,new"fabricated"motor mounts welded to chassis,you need to power the ecu and use the fr output from the ecu to power the fuel pump relay,you need the fuel injector resisitor but no the fuel pump resistor,you will need to splice the wires to the 22 pin plug on the ecu to the appropriate wires on you chassis,you may or may not need a different fuel pump(probably do)...if you join mr2oc there are guys who have done this on there...but i know that the hardest part if you will,is the motor mounts,also the exhasut has to be custom fit...