Originally posted by rangcrx
And not to sure if i would listen to him,Because all honda/integra injectors 86-91 are 6-7Ohm YOu need a resistor box no matter what in all preOdb cars and for integra 0db1 started in the 92 integras and if you want to make it a easy swap BUY A 90-91 si HARNESS OR cut the 4injector wires off the integra harness and splice them into the ecu plugs..........
This post is over four months old, I'm sure he got it worked out and doesn't need to buy your resistor box. And all the info I gave is correct, If you are going to say I'm wrong and try to correct me then at least list good info. Peak and hold injectors are between 2 and 3 ohms, You don't need a resistor box in obd0 cars if you do the wiring right and run saturated injectors. Where do you get your info from , like telling someone to run a block guard and an msd box on an NA honda. That would be the biggest waste of money and time. Before giving somone advice on something that could either cost them time or money at least try to make sure it is right.
rant over.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.