Thread: 94 ej getting swapped with a 93 da b18a1. I NEED SOME HELP
View Single Post
Old Jan 6, 2008 | 02:15 PM
  #1 (permalink)  
amimaxima's Avatar
amimaxima
Banned
 
Joined: Nov 2006
Posts: 1,830
Likes: 0
Default 94 ej getting swapped with a 93 da b18a1. I NEED SOME HELP
like the title says the car is a 94 ej that started out has a sohc 5 speed. the motor that is going is in a 93 da integra b18a1. and the transmission is a 98 dc gsr hydro 5 speed transmission.

the b18a1 and gsr tranny are in the car already.

I had a few questions:

what axles do I need? da 5 speed or dc 5 speed?

the b18a1 came out of an automatic car. now since I mated it with a 5 speed tranny what do I do about hooking up the reverse senor and electronic speedo sensor?

these are the 2 plugs that the b18a1 have by the transmission. (remember the harness on the b18a1 used to have an auto transmission.





there are alot of main harness plugs that don't plug into each other. what do I go about doing about this?

these are the plugs on the passenger side of the car that don't plug into the harness on the b18a1







and this is the harness on the passenger side of the b18a1 that doesn't plug into the harness on the car.








Last edited by amimaxima; Jan 8, 2008 at 06:31 PM.
Reply
0