I've been working on this project for just over a year, off and on, I have too many other projects, and I've sort of lost interest in this one. So, I figure I'll list it, and if it sells, it sells.

The motor is an redtop SR20. Mods include metal head gasket, ARP head studs, T3/T4 50 trim Turbonetics turbo on Peak Boost manifold, 740cc nismo injectors and Enthalpy rom tune. I had this motor in an S13, and it was a demon. Have not driven the truck with it.

The motor and trans are installed in the truck, plumbing and wiring are done. I put in a water to air intercooler with a motorcycle rad and ford lightning intercooler pump. Also has a 38mm tial wastegate and HKS SSQV blow off valve, plumbed for recirc stealth.

The truck is a 94 hardbody extended cab. I have put in the big C Notch, 4 link, and bags in the rear, as well as bags and dropped spindles in the front. Will lay frame in the rear, and damn close in the front. The front bags are 2500# firestones, and the rears are Slam specialties...either RE7's or RE8's...big bags. Front fenders have been cut, and replaced with custom inner wells. Bed is cut for notch.

The compressor setup is a Chassistech plug and play with 3/4 compressor, 5 gallon tank, 8 manifold valves (full FBSS), with switches and gauges. All it really needs is plumbing, and it would be moving (back is plumbed semi permanently already).

I also installed a 10 gallon poly fuel cell with high flow external fuel pump, a pair of Kinetik HC2000 powercells (really big batteries), and 20" edge chrome wheels with new tires.

The cab and bed are cut out for a walkthrough, and I have a no-window topper for it as well. I had intended to put a big system in it, but it could just as easily be lightened up for speed.

The tailgate, bumper, and rear lights have been filled, and cutouts are in for 39 ford taillights...you could really put about any tails in it, though. The bed has been cut for wheel clearance, and I intended to put trailer fenders in as flares.

The dash, and interior are out of the truck, but I have it all. I started shaving the doors, and then went to a hot rod style external latch, but it could be shaved just as easily.

There are probably a few other things I've forgotten, but that's the nuts and bolts of it. I'd like to get $6k for everything. I'm only half heartedly sellling it, so save the low ball offers. I might consider trades, but like I said, I have too many cars as it is.

Toby