OMG JUST STOP RIGHT NOW DO NOT GO ANY FURTHER!!!!!!!!!!!!!!!!!!!ok whew!!! now first of all if you have'nt already scored or burn't the cam to shit do this:1 set the cam lobes so that they are at the bottom so the valve guide is on the flat part of the cam NOT THE LOBE 2 place feeler gauge between adjuster screw and rocker arm where they meet and tighten just enough so that you can push the gauge between them with out bowing the gauge TAKE YOUR TIME ON EACH ROCKER til its perfect...3 NEVER TOUCH A HONDA AGAIN MUSTANG BOY!!!!!!!!