not today, but saturday.

cleaned and assembled intake manifold with all new gaskets.

new knock sensor on, new coolant and vacuum hoses on. modified the vacuum gallery/cut off all the unused hardlines

installed the fuel rail and injectors.

need to work on getting oil out of the head stud holes and get that stuff in, then head goes on. might be running around thanksgiving if i can muster up enough time to get stuff done and it doesn't turn too cold to work on stuff.


still in search of 5sp harness, picked up a few odds and ends though, gotta get another 0/1 gauge power wire for the rear battery - old one is cut in 2 from the wire tuck.