hi i have a 89 civic ek that convertered to mpfi and now only one injector trows gas there is plenty spart the crakn up with one piston but imagine i know is hard to believe but guess what i unplug the injectors while the car is running and theere is only one injector that if i unoplug it wont work
this is what i have on the car
obd1 ecu with coverter harness
obd1 dissy
and the injector resistor box(try to start the car without didnt started turn over but thats it)

plase help me finish my project its almost done thats the only thing i hanvent figure it out thanks
MPFI Swap
but
""""ok simple done a swap from dual multipoint fueled injection to a multi point fueled injection on a civic hatchback dx engine d16
i used the following
1 ecu obd1
2 resistor injector box
3obd1 disstributor
4new intake and gasket
5injectors obd1
and the issue is :
only one injector working there is plenty spark but only one injector works did what senior honda told me and found out that neither of the injectors trew gas using the conector from the working one so the wiring on the injector cables is done wrong do you have a diagram that i can see