$2,500!!!!!!! COME GET IT!!!!!!!

Coming off a 99 Integra GSR. The plumbing is off a Drag Gen3 kit. But im including everything you will possibly need on top of that.

(external mods engine)
Turbonetics real T3/T4hybrid turbo (need to make oil drain line into pan)
Drag exhaust manifold/down pipe
DRAG turbo piping
Blitz super blow off valve (best one i've ever heard)
DC downpipe-back exhaust system (5kmi old o2 sensor still in)
RC 550cc injectors with harness
Walbro gss-317 intank fuel pump with sock and flange 155gph
3-bar map sensor and harness and LHT map sensor bypass
Skunk 2 intake manifold with stock throttle body
(custom made linkage so strut brace fits)
Tial 7lb wastegate
TURBO XS BOOST CONTROLLER
HONDATA S100 Ecm Tuned perfectly for this setup (a/c will still work) (obd1 harness adapter needed)
Spearco style front mount intercooler (drag kit)
Weak-link 90degree hose at turbo pipe (the one that blows up at 10psi ($64 upgrade hose)
Guage pillar with temp and boost guages(GREY, NOT PICTURED) light up blue
(internal mods engine)
JE 9:1 forged pistons
Eagle forged rods H-beam
Recently rebuilt complete cylinder head with V-tec solenoid
3angle valve job with;
OEM cams
OEM valve guides
OMNI stainless steel valves
OMNI titainium retainers
OMNI dual sprung springs

I also have a bag of extra bolts/nuts and misc spares. I am noting that when i removed all these parts off my old car i fould a small exhaust leak at a weld (probably tip a exhaust place 5bucks and you can get it fixed) Also i had to remove two cam retainers, but they shouldnt be hard to find.
You can e-mail me at JSTRICKER@ASTONMARTINOFTAMPA.COM
I have plenty of pictures, just e-mail me for them. Also im offering tech support for you or whoever is going to install. I have a price in mind, but make me an offer. I'd like to see someone get to enjoy this setup