The Fronts are Z32 (30mm) aluminum with Hawk hp + or blue pads, ss lines and Brembo rotors.
The rears are stock S13 calipers and with Hawk HPS pads.
I run a 17/16 master cylinder with RBF 600 brake fluid
Tires are Toyo RA-1's

Ivan at CFP ran some real nice brake ducts using real hi-temp duct work... not the home depot dryer ducting.

This is the first time that I haven't had any brake fade. The only problem I had was overheating the rear tires. I was only running about 1.5 of neg camber in the rear so the rear tires rolling over in the tight corners