so heres a little update on what all ive gotten done so far.....
ive taken basically everything apart that i need to, now its time to get to installing, which will probably happen in the next few days.









this is one of the mounts for the driveshaft that has to be welded onto my car, luckily i know someone with a welder and im going to use that. for the other driveshaft mount, im just going to weld the studs onto the mount since its identical to the awd mount, and theres no point in spending ALOT of time (and i mean ALOT, its very time consuming) drilling through the spot welds.



before i can mount the new gas tank, i need to cut out the old gas tank mounts, and cut into the frame to put some bolts through the bottom of the frame to accommodate for the strap style mounts of the awd gas tank.