Motor is binding on something... Starter won't turn over the motor, and I can't even turn it over by hand with a ratchet wrench on the main pulley. Sooooo I guess I'm gonna pull the tranny back out and double check that the torque converter is seated correctly.

2 things also... First, there was no intermediate plate when i removed the tranny. I was told that's probably what fucked up my tranny. I put one on today however. Second, every single time I have put a torque converter onto the transmission, it has never slid in so far that the converter will hit the inside of the bell housing. I've never seen that so I was just curious.