Alright, I did the wiring and the bulb surgery and everything work. But I'm taking everything off because I didnt know the facts of the following: first, too much glare (light output)- really bad you know factory headlight wont help. Second, I researched more and I found that splice the factory wiring might damage ecu and can cause short circuit to the factory harness and to avoid that I need to get 2 relays. Third, to make it right, I decide to retrofit the headlight with projectors so that way (I dont kill anybody driving on the opposit direction) and I'm going to need D2s, in other words few changes to the kit. I know some of you are using G35 HID's, for those; here is the question, How did you do the wiring?, splice, relay, soldering, ect. Thanks everybody helping me here.