ok well when i got my 2g my power locks didnt work, i have replace everything i can think about replaceing on the system and still cant get them to work. replaced the relays under the radio, replaced the motors for the locks, replaced the hole assembly with motors again, repaced switches. still no power lock.

the problem im haveing is i got part of the system to work, orignaly the motors were all burned out. i found out that the power lock was stuck on lock and the motor would keep trying to spin, (hence killing my battary) and messing up the motor, so i got all new assembly and now the motor keeps going to the lock and its supposed to revurse when you hit unlock, all it dose is stop...then when you let go of the unlock it goes right back to trying to lock.

so long story short, something is keeping my locks in the lock possition and i have replaced everything i can think of, is there anything else someone can think of? i got door switches, motors and assemblies, and relays under the radio, is there anything else i should look at?