I got a gsr motor Ill be willing to let go for 3k.

b18c1 bore 81.50mm with an Arizona race machine block guard
Eagle H-beam rods
CP Pistons 81.50mm 9.0-1 comp
ARP Rod,Main,and Head bolts

Now the head
Skunk2 Duel Valve springs
Titanium retainers
Ferrea Stainless Steel Valves
Bronze Valve Guides
New Valve Seals
3 Angle Valve Job
Hot tanked
Stock GSR Cams
Aem Cam Gears
Stock GSR Intake manifold
All machine work Was done by Nelson Brothers Machine shop out of Clearwater
It also has a set of RC440 injectors Brand New
Aem fuel rail polished
B&M Fuel pressure Regulator

Motor has never been installed yet. It still needs a few misc parts. I was going to replace the intake (it has stock on it) It needs a tb, dizzy, water pump, timing belt, tensioner, timing belt cover. Motor is put together & if you want more specs I can get them for you. I have all the clearances for the crank & main bearings on file with most of the receipts & etc.
ALL gasketts & bearings are oem with the exception of the head gaskett it is cometic.

The pic bellow is when I was building it...