I've been going to the TK at 301 and 60 for a while now, and they seem to have done okay in the past, but after my last alignment for the Miata it felt wacky. So I decided to take it to Cars & Concepts (like everyone's been telling me to...)... Well, either TK's new tech has no clue what he's doing, or their machine is broken (or both!), because the alignment I got from them was WHACKED OUT.

Front camber was -2.2/-1.8. I had about a half a degree of total toe out in the front, which is HUGE - like 5 times what it should have been.

Rear camber was -1.9/-3.0, with MASSIVE toe out on the left, and toe out on the right...

So 2 hours and $128 later, I have a SWEET alignment from Cars & Concepts... -1.5 degrees camber front, -1.6 rear, 0.05 deg toe out front, and 0 toe rear. Dan hit the specs DEAD ON, too...within 0.01 degrees on all counts.

Car feels WAY better, haha.

It's a great shop too. Everyone seems to genuinely be "into" their cars. Dan is a Miata nut so we shot the bull while he was working... Nice place.


So, to summarize - TK: BAD. C&C: GOOD. JBALL: HAPPY.