Thread: Factory ECU for stroker build up
View Single Post
Old Jan 23, 2007 | 01:17 PM
  #14 (permalink)  
Duceanahalf's Avatar
Duceanahalf
is doing your girlfriend
 
Joined: Dec 2004
Posts: 7,101
Likes: 0
Default
with a 408 W using pistons that weigh 415 g Source at 6500 rpm, 4" stroke and a 6.25" rod

Your Inertia Force is 2,193.65 pounds.
Your Stroke/Rod Ratio is 0.32 .

Effect of Rod/Stroke on TDC and BDC inertia force:
Your Upward Inertia Force at TDC is 2,895.62 pounds.
Your Downward Inertia Force at BDC is 1,491.68 pounds.

at 7000 rpms
Your Inertia Force is 2,544.11 pounds.
Your Stroke/Rod Ratio is 0.32 .

Effect of Rod/Stroke on TDC and BDC inertia force:
Your Upward Inertia Force at TDC is 3,358.23 pounds.
Your Downward Inertia Force at BDC is 1,730.00 pounds.

Those weights are per cylinder Imagine how much stress eight of those are going to put on the block and the entire bottom end.
__________________


Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it
Reply
0