The car is now a 6 speed, The Slush box parts are out and the shifter box is mounted. The wiring has still to be done so the clutch saftey switch is functioning etc. The sealant has to dry over night before we could put the trim back together.



Inside:


The intercooler pipes will both be on the drivers side so this is how we modify the intercooler without giving up any flow. The intercooler is a Precision 600hp ( AS1025 - $375).We also don't really like the look of the super tight 180 deg bends.
The intercooler will be mounted tomorrow and the intercooler piping will be built. We will use 4 Ply Vibrant silicone connector in blue and all piping will be polished.