Old Aug 26, 2006 | 10:31 AM
  #1 (permalink)  
99B16Si's Avatar
99B16Si
Registered User
 
Joined: Sep 2001
Posts: 2,540
Likes: 0
Thumbs up New setup just about done....56k pack a lunch

After sometime and lots of money my setup is almost complete. Id like to thank John of Phearable.net for lending a helping hand several times along the way, KJ for making the manifold work with A/C, Ellis Autoworks for a sweet Downpipe, and many others for hooking me up with good quality parts. Motor was built and tuned by myself. So far 400+whp on pump gas. Race fuel soon to come

Block:
B18C1 1.93 Liter
Benson Ductile Iron Sleeves
CP 84mm pistons (sanded tops)
Pauter rods
GSR crank
Cometic 84mm headgasket
OEM Honda bearings
OEM honda timing belt
Honda oil pump
honda vtec water pump
moroso oil pan
ARP headstuds
Endyn breather kit
factory oil cooler
brand new pick up tube and windage tray
all new oem honda seals and such throughout

Head:
2000 Civic Si B16a2 cylinder head
GSR cams
Edelbrock Victor X intake manifold
skunk2 adjustable cam gears
NGK plugs
Supertech titanium valve springs and retainers (not installed yet)

Transmission:
Stock civic Si S4C transmission
ACT Extreme pressure plate
ACT 6 puck disc
Honda flywheel

Turbo kit:
Precision SC6152e
Tial 38mm wastegate
Custom stainless 4-1 tubular manifold
JRC Big FMIC (26 x 10 x 2.75)
Stainless 3" DP
2.5" aluminum polished I/C piping
Greddy type S style BOV
t-bolt clamps and silicone connectors
steel braided oil lines with an fittings (3an feed and 10an return)
K&N air filter

Fuel system/electronics:
Precision 1000cc injectors
walbro 255lph fuel pump (direct wired fuel pump with inline relay and switch)
AEM EMS standalone
AEM UEGO wideband and gauge in single pillar pod
Autometer boost and oil pressure in dual gauge bezel
Greddy Profec B boost conotroller
GM 3 bar map sensor
Relocated Intake air temp sensor
Honda resistor box

Misc:
Viper alarm with alert paging and remote start
Tein S tech springs
Nitto 450 tires with 50% tread all around
Very clean Stock Si body and interior
Fluidyne style radiator (not shown)
Jackon racing 160 deg thermostat
Heatwrapped manifold and A/C lines
New front brake rotors and OEM honda pads
All new ignition parts
Dual slim pusher fans
A/C is not in pics as i took them a couple weeks ago


















Last edited by 99B16Si; Aug 26, 2006 at 10:46 AM.
Reply