so ive changed my oil pan gasket FOUR times now and im still leaking oil. I just finished about an 2-3 hours ago, when i tighten the nuts/bolts i go from the inside/outside in a crisscross patern, and do this three time slowly tourqing them down tight so i dont get a warp. Now I just went acouple of blocks down the street to see if i still leaking and i get out of the car and sure enough the SOB is still leaking. Should the gasket buldge out in the corner a little? or does it just take acouple of days to get a perfect seal. i used a little bit of hondabond on the blockside. need info soon before i call my local honda dealership and pay out the ass to have them do it. thanks