Thread: WTB: Main Realy
View Single Post
Old Jun 30, 2006 | 10:13 PM
  #2 (permalink)  
B20.eg's Avatar
B20.eg
Registered User
 
Joined: Sep 2003
Posts: 1,505
Likes: 0
Default

check the connector. they are very picky and don't quite hold on tight. just unhook the connector from the pump and have someone turn the key to acc and see if there is voltage at the connector. if so, than you have a bad connection or bad pump. if not, then go for the relay. and just buy it from honda for like 10 bucks or go to a yard and get one.
Reply