Thread: '90 teg shell
View Single Post
Old Jun 12, 2006 | 10:18 AM
  #1 (permalink)  
juiced2ndgenteg's Avatar
juiced2ndgenteg
.........................
 
Joined: Apr 2003
Posts: 3,562
Likes: 0
Default '90 teg shell

1990 teg shell. white with black front bumper and hood.
JDM one peice headlights w/raybrig h4h hyper white bulbs(very brite) and yellow fog lights
ABS has been removed and replaced with all factory non-abs lines and proportioning valve
Less than 10k on brake master cylinder(was replaced when abs was removed)
stock suspension
z-10 crossmember
Black DA gsr leathers
GSR cluster ~120k
a/c boxes still under dash, I also have the condensor, lines, and compressor.
1992-93 front bumper
Fairly clean exterior/ no major body damage. only small quater size dings.
I have brand new ball joints and outer tie rod ends for it.
power windows and sunroof
Momo steering wheel
3" mandrel bent exhaust w/ 3" flowmaster style muffler
new shift linkage
cross drilled and slotted front rotors
Poly. rear trailing arm bushings
obd0-obd1 conversion harness with plugs for wideband o2 sensor(+,-, o2 input)
'96 gsr wheels with 225/50/15(F) 205/50/15(R) nitto 450's with 65+% tread left, 3 center caps.

$1500obo

Last edited by juiced2ndgenteg; Jun 21, 2006 at 04:30 AM.
Reply