Originally Posted by GT5.0HO_STANG
OK this is what i mean, wires that run from speaker connection unit, through the cone and into somewhere else that i can't see. Sorry if it didn't sound right the first time. But yeah the cable that runs through the cone is loose. And if you push that wire down the sub works and if its loose it wont. Anyadvice besides superglue. Trying to do this the best way or take it to the best places you guys kno of.
yupp easy fix. Your best bet is to scratch the wax off the line and resolder it. if the break is in the middle of the sub then pull the dustcap off, pull the lead through the hole, resolder, and use epoxy to reseal the tinsel lead hole and the dustcap.