Im about to build my y8 block and Im not sure how to measure for this type of stuff. I am looking into using the Endyn Roller Wave pistons(12.38-13.17:1 compression) and Eagle Rods. I also have a Zex Stage II cam. Ill post the specs of the pistons and cams below, I just want to know if someone could calculate this for me and tell me if Im going to have piston-to-valve clearance problems, all help appreciated! Thanks in advance!
_________________________________
Endyn Roller Wave Pistons:
D16Y8(Mid)
Bore-75.5mm
Stroke-90.0mm
Rod Length-5.394"
Compression-12.38-13.17:1
Dome Volume CC-3.09
Pin Diameter-19.0mm
Comp Height-1.162"

__________________________________
Zex Stage II Cam:59-300

DURATION

ADV.
Intake---Exhaust
260
232-------268
236

@.60"
Intake---Exhaust
220
190-------216
194
_______________________________
VALVE LIFT

Intake---Exhaust
.455"
.300"-----.430"
.310"
__________________________________
CENTERLINE

Intake---Exhaust
107°
111°------111°
115°