Originally Posted by Ender.
What tools do you need?
300 seems like a lot to do such a thing. Its not hard, just a matter of draining the fluids, soaking everything in PB Blaster, unbolting everything, installing new hardware and turbo, and filling everything back up.
Dont pay anywhere near 300 bucks for the job. Im not sure how much the brothers charge but if I were to pay someone I wouldnt go more than 100 bucks.
+1
That's a retarded ass price to bolt somthing on. There is no fabrication to be made with a 16g kit on a 2g. I recommend Jerry and the Brothers to do the work. Although you might have to wait a while because both are reallllly backed up right now.
If I didn't have a crazy work schedule and finals week, I would take on the job.
Maybe you should read some DIY's and you'll find that it's really not that hard.
PS: If you're just using a j pipe with your stock lower intercooler piping, all you need to do is turn it around and STREEEEETTTCCHHHHH, and then tighten the clamps down reallly tight. ( I know because I did it with the stock piping until i got my fmic)