Originally Posted by ugly86integra
unless the crank is wore down bad, you'll be just fine with aftermarket std bearings!
NO HE WILL NOT! NEVER SAY THIS. If your crank is "worn" down. REPLACE IT.
There is no STD bearing size for a Honda!!!!!
The bearing colors of the crank are marked on the crank itself!!! They are letter coded. It's been a while, so I do not remember which letter represents what color.
NOT ALL CRANKS HAVE THESAME SIZE BEARINGS!!!!
They vary from crank to crank!!! Green is not the standard size.
NEVER CUT A HONDA CRANK!!! It will fail on you. Period.
ONLY USE OEM HONDA BEARINGS!!! Everyone else fucks it up - except for 1 or 2 manufacturers, who I do not remember at this time.
STICK WITH OEM HONDA.