So, today im driving down dale mabry and all of the sudden the car starts acting up and it felt like i was hitting a wall when i would press the gas pedal. It turned off on me and i coasted to the rent a wheel next to bennigans after the stadium. I would turn the ignition on and would not hear the pump prime so i called martin from xat and he got me another walbro pump that they had there and i threw it on. The fpr gauge would read pressure so there was pressure in the fuel rail. I switched the pump cuz i couldnt hear it prime when it used to be loud before. So after i try and start again with the new pump i still dont hear it prime but it gets pressure. I attempt to start again and my buddy "alpha" connected his lap top, logged on to aem and we noticed it was reading 30psi of load and 100% throttle. I went and wiggled the map sensor and it started reading what its supposed to read. So it seems that the whole thing was due to the map sensor. Now, is the map sensor messed up or is it a connection/wiring issue? This is my next pain in the ass.....figuring out if the damn map sensor works or not.......awesome.....