I dont want to drag him into this...

-three rocker arms not connected to the push rod or valve
-one lifter had broken into pieces
-one severly bent pushrod
-one missing pushrod
-and one of the bolts to hold down the valve cover was also bent

The motor was babied because he was told the tune was off and not to romp on it. I can verify this because he wouldnt even rev it when I asked him to before he found all this stuff.. Also, he lost compression on a cylinder or 2. Now, let me state this, this was a factory crate motor and was installed by AV. IMHO, If im installing a motor, Im going to check it out especially after he complained about it and then let him keep driving it. I dont know what exactly AV installed on the motor, but its just MHO.