Originally Posted by GB
What HP do you think it will be pushing at 10psi? I want a combo that is safe on the block and I'm leaning more to the 10lbs without the power pipe. I was also going to use the 38lb injectors w/a 80mm mass air, should I bump it down to 36lb injectors or stay with 38's?
Not sure how the TFS cam responds to boost but if it you should be in the neighborhood of 430-450 with 10psi and a good tune and good gas.
I've seen a less motor make those #s @10psi....
stay with the 38#s minimum.