I just finished putting a b16 in my 91 hatch dx. I did the wiring in the car myself and got the car running. So I go ahead and take the car out for a spin and it drove great for awhile. Then out of no where the car starts sputtering and missfiring. So I parked the car and started checking out to see what went wrong. It felt like the car wasn't getting enough fuel. So checked the fuel pump its fine checked the fuel filter as well and thats new but doubled checked it. So then my next step was the fuel injectors. I started messing around with them I came out to be that when I would remove number 2,3 plugs off the injector the car would idle better but when I would plug them back on the injectors it would start idleling like shit. What could be the problem bad injectors or my wiring could be a little bit fucked up. Please any info will help got to get the car started by this week.