i picked up this gsr block with main caps and girdle. the block has a few issues but if you are looking for a spare block to sleeve this is the perfect deal.
heres the deal, its a b18c1 block i bought it with a b18b1 crank rods and usdm itr pistons. The previous owner bent a rod and the big end of the rod hit the bottom of the cylinder bore number 2. the cylinder has been checked with a dial bore gauge personally by me and is on the far part of in spec. so its good if you want to daily drive it but any serious build of ANY sort i would sleeve it. The rod journal on cylinder number 2 is ground down due to the rod failure. I would sell the ls rods with itr pistons on it if wanted with the block the (rods need to be line honed) . I have miked all of the pistons ans they are all in spec. Other than that, i have deburred the whole block and it has been cleaned up. sorry i have no pics.

pm me for any more info.
i would like 100 for the block but am open for offers again the pistons and rods i would want extra for.
the only thing this block is missing is the pan.