well...once again my shitty car is not working. i was having trouble with bogging down and stalling sometimes so i tried to change the spark plugs and the spark plug wires. first of all i bought Xact wires which were the cheapest pieces of shit ever. i tried switching them out with the new ones, and yes i made sure they were plugged in the correct things. i also put the new spark plugs in. (autolite) crank the engine. car starts and idles so low it stalls. so i tried putting all the old stuff back in. car does the same thing. i tried every combination of new wires and plugs (new wires/old plugs old wires/new plugs etc.) still did the same thing. The car was running perfectly before i tried this. So i finally just put the new plugs in and put the old wires on because by now most of the new ones were broken from poor design. i start the car. i pull the first wire out while the car is running (in a very low almost stalling idle) and it stalls. i pull the second wire and it stalls. I pull the third and fourth wire out while it is running and it doesnt stall. so essentially the car is running on 2 cylinders. so i limped it home. WHAT THE FUCK HAPPENED!!!!