PICS FIXED

Need the money for more important things, getting out of the scene, the motor is 99.9% complete, it just needs rod&main bearings, and to be assembled. Looking to get $1200obo Pics and specs below:

2001 USDM ITR shortblock w/girdle, coated in high temp silver - 40k miles
Block was hot tanked and honed - 0 miles
Block surface has been decked .5 thousandths - 0 miles
FRESH micropolished & balanced p73 ITR crank w/crank pulley - 0 miles
OEM ITR pistons mounted on rods w/rings and wrist pins - 40k miles
Brand new OEM ITR oil pump - 0 miles
OEM ITR oil pan
OEM ITR flywheel - 40k miles

2001 USDM ITR head w/cams, intake manifold, distributer, vtec soleniod (100% complete) - 40k miles
Head is shaved .30 thousandths - 0 miles
Minor port job with cleanup of head - 0 miles
3 angle valve job - 0 miles
OEM red ITR valve cover w/spark plug cover

The only thing it needs to be 100% complete are rod and main bearings..

Motor came from my friends ITR, I bought it in need of a rebuild with plans to make a sweet all motor setup, which I almost finished but now I need money for other things (lawyer, as most of you know), and now onto the pics, sorry for the quality as they were taken on the camera phone















There it is folks, I'll try to get some better pics, but my camera is broken so I gotta use a camera phone!