Originally Posted by Outkasted24

Take the bottom out first by pushing the seat in and then prying up.
There are two "L" shapped clips in the front of the seat on either side that need to slide out of their channels before yanking up.

(I'm not sure, But their may be 1 or 2 10mm bolts towards the back of the bottom seat that need to come out) It's been a while since I did this mod.

Once the bottom is out, Pop off the black retaining clips on either side (on the bottoms) of the 60/40 top seats, Once the clips are out.....The seats will slide outwards and come off the "T" looking bracket in the middle of the body.

Hope that explaination helps, If I had pics......They would be up.......But I don't!!!!

Let us know if you run into any problems.

-Jeff